Keysight N5182B MXG X-Series RF Vector Signal Generator, 9 kHz to 6 GHz

Keysight N5182B MXG X-Series RF Vector Signal Generator, 9 kHz to 6 GHz

N5182B-Option 503：  9 kHz to 3 GHz 

N5182B-Option 506：  9 kHz to 6 GHz

N5182B MXG X-Series RF vector high performance signal generators are fine-tuned to be your 

“golden transmitter” in R&D with 9 kHz to 6 GHz frequency coverage. Simulate real-world signals 

with real-time capabilities with Signal Studio software.

Highlights

NOTE: This product is going to be discontinued and will be replaced by N5186A MXG vector signal generator.

▶Take your designs to their limit with outstanding hardware performance, including unmatched phase 

   noise and spurious characteristics.

▶Drive power amplifiers and characterize nonlinear behavior with industry-leading adjacent channel power

   ratio (ACPR) and output power.

▶Test wideband devices with factory-equalized 160 MHz RF bandwidth.

▶Reduce the time spent on signal creation with PathWave Signal Generation software, including LTE,

   WLAN, and GNSS.

▶Lower your cost of ownership with 3-year cal cycles and comprehensive solutions for self-maintenance.

Definitions and Conditions

Specifications represent warranted performance of a calibrated instrument that hasbeen stored for a minimum of 2 

hours within the operating temperature of 0 to 55 °C,unless otherwise stated, and after a 45 minute warm-up period. 

The specificationsinclude measurement uncertainty. Data represented in this document arespecifications unless otherwise

 noted.Typical (typ) describes additional product performance information that is not coveredby the product warranty. 

It is performance beyond specifications that 80 percent of theunits exhibit with a 90 percent confidence level at room

 temperature (approximately25 °C). Typical performance does not include measurement uncertainty.Nominal (nom) values

 indicate the expected mean or average performance, or anattribute whose performance is by design, such as the 50 ohm 

connector. This data isnot warranted and is measured at room temperature (approximately 25 °C).Measured (meas) describes

 an attribute measured during the design phase forpurposes of communicating expected performance, such as amplitude drift vs.

 time.This data is not warranted and is measured at room temperature (approximately25 °C)。

Options

Frequency Range

N5182B-503：   Frequency range, 9 kHz to 3 GHz  

N5182B-506：   Frequency range, 9 kHz to 6 GHz  

Connector Configuration

N5182B-1EM：    Move all connectors to rear panel

General Performance Features

N5182B-UNZ：    Fast frequency switching  

N5182B-UNX：   Low phase noise  

N5182B-UNY：    Enhanced low phase noise  

N5182B-1EA：    High output power  

N5182B-1EQ：    Low specified power (less than -110 dBm)  

N5182B-1ER：    Flexible reference input (1-50 MHz)  

N5182B-099：    Expanded license key upgradability  

Vector System Features

N5182B-UNV：   Enhanced dynamic range  

N5182B-657：    Upgrade baseband generator to 160 MHz RF bandwidth  

N5182B-656：    ARB baseband generator (80 MHz RF bandwidth, 32 MSa)  

N5182B-1EL：    Differential I/Q outputs  

N5182B-023：    Upgrade baseband generator memory from 32 Msa to 1 Gsa  

N5182B-022：    Upgrade baseband generator memory from 32 Msa to 512 Msa  

N5182B-660：    Upgrade baseband generator with real-time capability  

Analog Modulation

N5182B-303：    Multifunction generator  

N5182B-UNT：    AM, FM, phase modulation  

N5182B-UNW：   Narrow pulse modulation  

Vector Firmware Applications

N5182B-004：    Digital input connectivity with the N5102A  

N5182B-003：    Digital output connectivity with the N5102A

Additional Features

N5182B-006：    Instrument security and removable memory card  

N5182B-009：    Internal solid state memory  

N5182B-012：    LO in/out for phase coherency  

N5182B-FRQ：    Frequency extender connectivity  

N5182B-SD0：    No internal non-volatile memory/solid state drive